Saucisson d'Ardenne

User avatar
redzed
Moderator
Moderator
Posts: 3852
Joined: Fri Apr 20, 2012 06:29
Location: Vancouver Island

Saucisson d'Ardenne

Post by redzed » Sun Feb 21, 2021 20:12

Saucisson d'Ardenne

This is a traditional Belgian smoked and fermented sausage that's on the EU list of PGI European certificates of origin. Mild and gently seasoned, it's great if you like the smoke flavour in dry cured sausages. The saucisson I made is made with pork only, but some variations also include beef.

PGI info can be found here: https://eur-lex.europa.eu/legal-content ... XC0603(02)

Image

Recipe for 1kg of meat
Meats

750g class I pork from leg and and loin, no fat or connective tissue
250g hard back fat
Ingredients
22g fine sea salt
3g Cure#2
2g granulated garlic
1g cumin
1g mace
1.5g crushed juniper berries
2g dextrose
1g sucrose
0.3g Texel DCM-306 starter culture
Process
1. Cube meat and fat, mix with salt, Cure#2, and refrigerate in a sealed container for 48 hours.
2. Freeze fat completely, leave the cubed and cured meat in freezer for one to two hours so that it it freezes partially.
3. Revive starter with small amount of distilled water and a pinch of dextrose. Add to meat within 20 minutes.
4. Grind everything through 6mm plate. Do not grind fat separately.
5. Mix starter culture and spices with the meat. Keep ground meat cold, mix thoroughly, taking care not to over mix to avoid fat smearing. You may want to refrigerate the meat between the grinding, mixing and stuffing steps.
6. Stuff into 45-50mm beef middles. D'Ardenne may also be made in large diameter casings.
7. Ferment at a temp of 18-20C for 48-72 hours, until pH drops to 5.2 or slightly lower.
8. Cold smoke in two 8hr sessions over 2 days, taking care not to go over 20C. I also added juniper berries to the smoker.
9. Hang for approximately 4 - 5 weeks at 12C and 75-80% RH, until a weight loss of 35%. Weight loss is calculated from the weight of the sausage after stuffing.
10. Mould is not desired on this sausage. Mine took some on after about two weeks in the chamber and I left it on.
User avatar
Bob K
Moderator
Moderator
Posts: 2232
Joined: Sun Jun 02, 2013 15:16
Location: Northwest Ct

Re: Saucisson d'Ardenne

Post by Bob K » Mon Feb 22, 2021 14:17

Looks great. Curios that while keeping the salt at 2.5% why you have raised the cure amount in a few of your recent creations?
User avatar
Scogar
Passionate
Passionate
Posts: 218
Joined: Tue Jan 08, 2019 23:28
Location: Atlanta GA

Re: Saucisson d'Ardenne

Post by Scogar » Mon Feb 22, 2021 14:45

Thanks for the link, a great deal of interesting info there. And I think a successful rendition on your part
User avatar
redzed
Moderator
Moderator
Posts: 3852
Joined: Fri Apr 20, 2012 06:29
Location: Vancouver Island

Re: Saucisson d'Ardenne

Post by redzed » Mon Feb 22, 2021 17:37

Bob K wrote:
Mon Feb 22, 2021 14:17
Looks great. Curios that while keeping the salt at 2.5% why you have raised the cure amount in a few of your recent creations?
O.3% Cure #2 is still well within the limits and I am trying to get better colour. Next batch I might go back to using S. erythorbate.

BTW, with this particular saucisson, I have concluded that while it's mild and pleasant, the taste is slightly flat. A couple of grams of white pepper would have probably made a difference.
User avatar
Bob K
Moderator
Moderator
Posts: 2232
Joined: Sun Jun 02, 2013 15:16
Location: Northwest Ct

Re: Saucisson d'Ardenne

Post by Bob K » Mon Feb 22, 2021 18:50

redzed wrote:
Mon Feb 22, 2021 17:37
O.3% Cure #2 is still well within the limits
While I really don't think a little extra nitrite will harm you the US regs are at 156ppm in going nitrite for a commuted product...you are adding around 186ppm.
The in going nitrate however is WELL below the limit whether your cure #2 contains 1% 0r 4% nitrate, or some-wear in between
Indaswamp
Passionate
Passionate
Posts: 207
Joined: Tue Aug 11, 2020 05:46

Re: Saucisson d'Ardenne

Post by Indaswamp » Mon Feb 22, 2021 19:45

Bob K wrote:
Mon Feb 22, 2021 18:50
redzed wrote:
Mon Feb 22, 2021 17:37
O.3% Cure #2 is still well within the limits
While I really don't think a little extra nitrite will harm you the US regs are at 156ppm in going nitrite for a commuted product...I think the CA regs are less.
The in going nitrate however is WELL below the limit whether your cure #2 contains 1% 0r 4% nitrate, or some wear in between
The U.S. regs. for nitrate and nitrite in dry cured products is much higher than 156ppm....

dry cured products
Sodium and potassium nitrite- 625ppm
Sodium and potassium nitrate- 2187ppm
Indaswamp
Passionate
Passionate
Posts: 207
Joined: Tue Aug 11, 2020 05:46

Re: Saucisson d'Ardenne

Post by Indaswamp » Mon Feb 22, 2021 19:57

@Redzed- very cool site you found for looking up PGI info. I have been looking for just such a resource. Thanks for posting.
User avatar
Bob K
Moderator
Moderator
Posts: 2232
Joined: Sun Jun 02, 2013 15:16
Location: Northwest Ct

Re: Saucisson d'Ardenne

Post by Bob K » Mon Feb 22, 2021 20:10

Indaswamp wrote:
Mon Feb 22, 2021 19:45
The U.S. regs. for nitrate and nitrite in dry cured products is much higher than 156ppm....

dry cured products
Sodium and potassium nitrite- 625ppm
Sodium and potassium nitrate- 2187ppm
That is for uncommuted whole muscle cuts and if you research it further the specified period of time is over 90 days
See page 24 of the USDA Handbook
The amount of ingoing nitrite used in dry cured products, such as country ham, country style pork
shoulder, prosciutto, etc., is based on the green weight of the meat or poultry in the product
formulation. These products are prepared from a single intact piece of meat or poultry that has
had the curing ingredients directly applied to the surface, and has been dried for a specified period
of time
. For large pieces of meat, the curing ingredients must be rubbed on the surface several
times during the curing period. The rubbed meat or poultry cuts are placed on racks or in boxes
and allowed to cure. Nitrite is applied to the surface of the meat or poultry as part of a cure
mixture.
User avatar
redzed
Moderator
Moderator
Posts: 3852
Joined: Fri Apr 20, 2012 06:29
Location: Vancouver Island

Re: Saucisson d'Ardenne

Post by redzed » Tue Feb 23, 2021 00:19

Bob K wrote:
Mon Feb 22, 2021 18:50
redzed wrote:
Mon Feb 22, 2021 17:37
O.3% Cure #2 is still well within the limits
While I really don't think a little extra nitrite will harm you the US regs are at 156ppm in going nitrite for a commuted product...you are adding around 186ppm.
The in going nitrate however is WELL below the limit whether your cure #2 contains 1% 0r 4% nitrate, or some-wear in between
Now Bob, I live in the Great White North and the USDA regs don't apply. Canadian regulations are 200ppm nitrite for all products, smoked or long term cure/dried, and an additional 200ppm is permitted to long term cured/dried. The #2 formulation that I have is 6.25% nitrite and 4.5% nitrate that works out to 186ppm and 135ppm respectively.

As to the USDA regs, yes the in going amounts seem crazy high, but the amounts have to be adjusted so that the finished product does not exceed 200ppm of nitrite.
Indaswamp
Passionate
Passionate
Posts: 207
Joined: Tue Aug 11, 2020 05:46

Re: Saucisson d'Ardenne

Post by Indaswamp » Tue Feb 23, 2021 03:42

Thank you for the clarification Bob...
Lorenzoid
User
User
Posts: 73
Joined: Sat Jul 18, 2020 18:09
Location: Atlanta

Re: Saucisson d'Ardenne

Post by Lorenzoid » Tue Feb 23, 2021 17:44

redzed wrote:
Sun Feb 21, 2021 20:12
PGI info can be found here: https://eur-lex.europa.eu/legal-content ... XC0603(02)
. . .
Interesting. I was under the impression that Ardennes ham was Belgium's only PDO (PGI?) product. Don't know where I read that. My wife is Belgian and we seek out the Ardennes products when we're over there visiting (which did not happen in 2020). France gets all the attention, but Belgium has some worthy stuff. :|
User avatar
redzed
Moderator
Moderator
Posts: 3852
Joined: Fri Apr 20, 2012 06:29
Location: Vancouver Island

Re: Saucisson d'Ardenne

Post by redzed » Tue Feb 23, 2021 18:10

Lorenzoid wrote:
Tue Feb 23, 2021 17:44
redzed wrote:
Sun Feb 21, 2021 20:12
PGI info can be found here: https://eur-lex.europa.eu/legal-content ... XC0603(02)
. . .
Interesting. I was under the impression that Ardennes ham was Belgium's only PDO (PGI?) product. Don't know where I read that. My wife is Belgian and we seek out the Ardennes products when we're over there visiting (which did not happen in 2020). France gets all the attention, but Belgium has some worthy stuff. :|
Yes there is more to Belgium than fried potatoes and waffles. I did a cycle tour in Belgium in 2019. Cycled 1,200km, great cycling infrastructure and very friendly people.
User avatar
Albertaed
Passionate
Passionate
Posts: 216
Joined: Mon Mar 21, 2016 23:22
Location: Peace River Alberta

Re: Saucisson d'Ardenne

Post by Albertaed » Tue Feb 23, 2021 18:18

Red have you ever used corn syrup Solids to enhance colour in dry salami?
fatboyz
Forum Enthusiast
Forum Enthusiast
Posts: 512
Joined: Sun Aug 21, 2016 19:26
Location: Alberta

Re: Saucisson d'Ardenne

Post by fatboyz » Tue Feb 23, 2021 20:37

Ed I have seen Corn Syrup solids in recipes and thought it was just another form of sugar? Do you know if you use instead of sugar/dextrose? or in addition to? Do you know why it enhances color? Does it make it more red?
Lorenzoid
User
User
Posts: 73
Joined: Sat Jul 18, 2020 18:09
Location: Atlanta

Re: Saucisson d'Ardenne

Post by Lorenzoid » Tue Feb 23, 2021 23:51

redzed wrote:
Tue Feb 23, 2021 18:10
Yes there is more to Belgium than fried potatoes and waffles. I did a cycle tour in Belgium in 2019. Cycled 1,200km, great cycling infrastructure and very friendly people.
Yes, there is also beer, and their national pastime, cycling.
Post Reply